What Attic Spray Foam Insulation Involves in Surprise, AZ
Attic jobs in Surprise differ by surface and by foam type, and each one gets its own line in the estimate. The crew works through the list below in order, so nothing is sprayed twice and nothing is skipped on the way to the finished attic:
- Roof deck foam goes on the underside of the roof sheathing and between the rafters, which makes the attic unvented and brings the ducts inside the conditioned space.
- Gable end and rafter coverage carries the foam to the end walls, so the sealed attic has no bare gap where heat can come in.
- Attic floor foam covers the ceiling joists instead of the roof and suits a vented attic where the roof deck stays bare.
- Open-cell foam costs less, fills irregular spaces and gives R-3.5 to R-3.7 per inch, so it suits a rafter bay with room for a thick layer.
- Closed-cell foam gives R-5 to R-7 per inch and is the better choice on a roof deck, so ask for it where the space is tight. The open cell vs closed cell page compares them in detail.
- Duct and air handler enclosure places the equipment inside the sealed attic, which stops cooled air from crossing a 130 degree space.
- Old insulation removal gets its own line when the existing material is soaked or matted, so you decide whether it belongs in the job.
- Vent decisions are written into the estimate, because an unvented attic needs no ventilation and a vented attic still does.